This table can be operated with either a dedicated vacuum pump or a standard vacuum cleaner.
An adjustable adapter between approximately 1 "and 1.75" is included.
In addition, each module can be switched off individually with a ball.
The holding force is proportional to the covered area, the friction coefficient and the differential pressure.
To increase the frictional coefficient a perforated rubber mat is supplied.
This also serves as protection for the vacuum plate when workpieces are milled.
Vacuum table VT2016 SEAL
1 pc connector adapter
1 piece wrench 68mm
1 pcs hole rubber mat
1 piece for covering unused holes
3 pcs hose connection
|Vacuum table technical|
|External dimensions||210 x 160 mm|
|Clamping dimensions||210 x 160 mm|
|Spacing||10 x 10 mm|
|Adapter mat||rubber hole|