The VT5050 SEAL vacuum table can be operated either with a dedicated vacuum pump or with a decent vacuum cleaner.
An adjustable vacuum nozzle adapter is provided which can be adjusted between 1 "and 1.75".
Better results can be achieved with a dedicated vacuum pump.In addition, each module can be switched off individually with a ball valve.
The holding force is proportional to the covered area, the friction coefficient and the differential pressure.To increase the frictional coefficient a perforated rubber mat is supplied as standard.
A cover mat is also included which serves as protection for the vacuum plate when workpieces are milled.
Material: aluminum, polyethylene
External dimensions: 510 x 500 mm
Clamping surface: 500 x 500 mm
Height: 29 mm
Spacing: 10 x 10 mm
Connections: 9 mm internally calibrated
Face Milling Reserve: 4 mm
Adapter mat: rubber hole
Hose connections: 4
Vacuum table VT5050 SEAL
1 x Connector adapter
1 x Piece wrench 68mm
1 x Holed rubber mat
1 x Piece for covering unused holes
2 x Hose connection